Product Features of CNC Drama Bed
Adopting a dedicated text PLC integrated machine controller for sawing machines, with stable functions and fast response
Digital display of sawing quantity, integrated with manual and automatic modes, with free selection of modes
Automatic feeding, automatic sawing, cyclic work, reducing labor intensity, and improving work efficiency
● Stepless speed regulation for feeding, and the cutting speed of the saw can be adjusted according to the material requirements for belt gear adjustment
Drive type wire brush for chip cleaning, improving the service life of saw blades
Equipped with a small material bundle sawing device to improve the efficiency of small material sawing
Suitable for large-scale sawing of materials of the same specification
Parameter specifications of CNC drama bed
Sawing range (mm): φ 300 ■ 300X300
Saw band specification (mm): 3660X27X0.9
Feed speed: stepless speed regulation
Saw blade linear speed (m/min): 26.41.52.74
Total power of machine tool (kw): 3.79
Clamping method: hydraulic
Boundary dimension (mm): 1800X1900X1350
Safe operation of CNC drama bed
Editing of Safety Operating Regulations for Band Sawing Machines
1. The operation and maintenance personnel of the band saw machine must undergo professional training and master the operation and maintenance skills of the band saw machine. Operators should ensure sufficient sleep and maintain concentration.
2. When shifting gears, it is necessary to first stop the vehicle and then open the protective cover. Rotate the handle to loosen the belt, place the V-belt in the desired speed slot, and then tension the belt and cover the protective cover.
3. The adjustment of the wire brush for chip removal should make the wire contact the teeth of the band saw blade, but not exceed the root of the teeth. Pay attention to observing whether the wire brush can remove iron chips.
4. Adjust the guide arm along the dovetail guide rail according to the size of the workpiece being processed. After adjustment, the guide device must be locked tightly.
5. The maximum diameter of the sawn material must not exceed the specified value, and the workpiece must be firmly clamped.
6. The tension of the band saw blade should be appropriate, and the speed and feed rate must be appropriate.
7. Cast iron, copper, and aluminum parts do not require cutting fluid, while others require cutting fluid.
8. During the cutting process, the saw blade breaks. After replacing it with a new saw blade, the workpiece must be turned over and sawed again. The saw bow should be lowered slowly and not impacted.
9. During the cutting process, operators are strictly prohibited from leaving their positions and wearing gloves for operation.
10. At the end of each shift, it is necessary to cut off the power supply, open the protective cover, remove chips brought into the vicinity of the saw wheel, and carry out daily maintenance and cleaning work around the area