As a basic metal processing machine tool equipment, band saw machines involve hydraulic, transmission, clamping, sawing, cooling and other modules due to their complex structure. If used improperly and with poor usage habits, it can affect the failure rate and service life of the band saw machine. This article will provide a detailed introduction to the daily use and maintenance precautions of band sawing machines.
Vertical band sawing machine GB5340
1. During use, it is necessary to pay attention to observation at all times, check whether all operating components are working properly, and whether there are abnormal sounds. If any, the cause should be promptly identified and eliminated.
2. During the chip cutting process, a large amount of iron chips are generated and accumulated in the workbench and saw wheel screen. They should be removed in a timely manner to avoid blocking the sawteeth and affecting the sawdust effect and saw band life.
3. Regularly check the cleanliness and oil level of the coolant and hydraulic oil to ensure sufficient oil supply and avoid hydraulic component blockage, which may cause abnormal machine operation.
4. Sufficient lubricating oil should be added to the surface and lubrication points of the guide rail, and lubricating grease should be added to the passive saw wheel bearings once every six months.
5. Complete work every day. The band saw blade should be relaxed to improve its service life.
6. The lubricating oil in the turbine gearbox should be replaced regularly, usually for six months.
7. When the machine tool is idle, oil seals should be applied to the guide rail and processing surface to prevent rust on the working surface.
8. In order to improve the use effect of the saw band, every time a new saw blade is replaced, it is necessary to first run in. That is, the first few cuts during cutting should use a low speed and small feed rate. After the burrs on the tooth tip are removed, the cutting should be carried out according to normal chip parameters.
The practical guide for sawing machine maintenance provided in this article aims to help you easily master the maintenance skills of sawing machines. Starting from multiple aspects, regular maintenance of the saw machine can not only extend its service life, but also improve work accuracy and efficiency, avoid safety accidents. We hope it will be helpful to you. If you have any purchasing needs for band saw machines, please feel free to leave a message or call for consultation.